SaniCubic Grinder Pump System, Automatic, (2) 1 hp, 208-240 VAC, 1 ph
PartSAF029
MFG029
Description
Saniflo® Duplex Grinder Pump, 1-1/2 or 4 in Inlet, 36 ft Maximum Head, (2) 1 hp, 220/240 VAC, 13 A, 1 ph, 158 deg F, Import
Price/Availability Accessible On Login
- A pre-assembled duplex grinder system capable of discharging wastewater from multiple fixtures (220 to 240 V/60 Hz)
- Two powerful 1 hp motors
- 36 ft vertical and/or 328 ft horizontal discharge
- Rated IP68 with external control and alarm
- Easy access service panel
- Capable of handling up to 90 gpm
- Handles the waste from multiple bathrooms and fixtures throughout a home or building
- System will stay operational when underwater
- Easy installation above the floor eliminates any possible mess and cuts down on additional expenses
- Smart-pump technology allows both pumps to work simultaneously if the incoming rate is higher than the discharge rate of the single pump
- The discharge rate increases roughly 80% until the condition is alleviated
- 1-1/2 in discharge pipe
The SANICUBIC 2® is a pre-assembled heavy-duty duplex grinder pump that meets the demanding needs of commercial and residential sewage applications. The duplex-grinder system made of stainless steel liquefies solids into small particles prior to being passed through the 1-1/2 in discharge. It is designed to handle multiple waste fixtures for applications such as residential single or group homes, commercial buildings, schools and many more. This new system consists of two 1 hp motors housed inside a compact but highly durable plastic enclosure. Each independently operating grinder has its own high-performance grinding system a fast-rotating cutting blade to reduce solids in the wastewater stream from toilets, tubs and showers, sinks, washing machines, dishwashers and more. The SANICUBIC 2® operation is as simple as the installation. The effluent enters the pump through one of five different inlets - one on either side of the unit at the bottom and three along the top. The inlets can accommodate 1-1/2 in or 4 in Dia pipes. As soon as the wastewater level reaches the trigger point, the pumping system activates. The effluent is then pumped out through 1-1/2 in Dia rigid pipe connected on the top of the pump. Maximum pumping distances are 36 ft vertically and/or 328 ft horizontally. The inside of the SANICUBIC 2® comprises of a couple of pressure switches and a circuit board assembly, which starts and stops the unit and of a couple of motors, which drive the stainless steel cutting blades and the pump. The motors are sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the macerator blades. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter that enter the enclosure are reduced to slurry and are picked up by the impeller mounted beneath the motor. The two grinders inside the SANICUBIC 2® are engineered to operate alternately. They each take turns handling the wastewater so that neither is more heavily used over time than the other. However,
Type | System |
Series | SaniCubic |
Automatic/Non Automatic | Automatic |
Power Rating | (2) 1 hp |
Voltage Rating | 208-240 VAC |
Phase | 1 ph |
Amperage Rating | 13 A |
Basin Capacity | 12.4 gal |
Domestic/Import | Import |
Horsepower | (2) 1 hp |
Inlet Size | 1-1/2 or 4 in |
Maximum Head | 36 ft |
Temperature Rating | 158 deg F |
Brand | Saniflo® |
Country of Origin | FR |
Manufacturer | Saniflo |
UPC | 859925002299 |
Manufacturer Part Number | 029 |
3 Years Limited
ASME A112.3.4|CSA Certified|CSA B45.9|IAPMO Listed|UPCus Listed
Commercial and Residential Applications
Videos
Video Link Video
Price/Availability Accessible On Login
- Recommended Accessories
- Competitive Brands
- Recently Viewed
No applicable products
No applicable products
No applicable products

Saniflo®SaniCubic Grinder Pump System, Automatic, (2) 1 hp, 208-240 VAC, 1 ph
- Customers Also Purchased
No applicable products